You may also try pressing on the bottom of the seat with your foot. That works for some chairs, but all don't come with this feature.
Here in this article, on the reader's demand, we have decided to provide you with a comprehensive guide on office chairs won't go up.
Office Chair won't Go Up - Follow Easy Steps
The office Chair is a great product when it works, but it can be a bit finicky. You may be having trouble with the chair because it's not calibrated correctly.
There are two ways to calibrate the chair:
- An app
- Hardware buttons
If your chair is having trouble going up, there could be plenty of reasons like:
Steps To Follow initially
If your chair has trouble going up, it might be because the legs are not calibrated properly. Follow these steps to calibrate them:
- Make sure all four legs are level on the floor. If one or more aren't level, adjust them until they are level. You can do this by loosening a screw underneath each leg and tightening it until it's level with the other legs.
- Ensure none of the legs touch any furniture or objects on their sides (such as carpets). This will cause friction and make it difficult for the motor to move the legs up and down smoothly. If something is touching one or more of your chair's legs, move it away so that they aren't touching anything while moving up and down during calibration.
Causes Of Office Chair Won’t Go Up
It’s not uncommon for a desk chair to lose its ability to raise up and down. If you’re lucky, it might be an easy fix. However, it could be more serious if you’re unlucky (like me). What should be the case? Here are a few solutions that might cause this problem:
1. The Chair Is Broken
This is the most common reason a chair won’t go up or down. If any cables have snapped or broken, you may need to replace the cable assembly or the entire chair mechanism.
2. The Switch Or Motor Has Malfunctioned
If this happens, the motor may have stopped working, or it may not have enough power to move your chair smoothly. In either case, you should replace the part before using it again.
3. Your power strip is overloaded
If you have several devices plugged into one power strip, it could overload and stop working properly, making your computer unstable or crashing altogether.
Try unplugging some of your other devices from your router or other outlets on that same circuit breaker and see if it helps resolve your issue with your desk chair not staying up properly anymore!
4. Chair Is Blocked Into The Place
You should first check whether the chair is locked into place. Many chairs have a lock button on the front that will keep them from moving up or down.
If you don’t see any buttons, try pressing down on the back of the seat while pressing down on the footrest. This should release the lock and allow you to move your chair up and down freely.
5. Stuck Something Underneath
If your chair still has issues staying in place after checking for locks, it could be that something is stuck underneath. To check, look at all sides of your chair base to see if there are any objects or debris that may prevent it from staying locked into position when sitting at your desk.
Solutions of Office Chair Won’t Go Up
If your office chair is stuck in the down position, there are a few things you can do to fix it.
New Pneumatic Cylinder
A simple solution might be as close as the hardware store if your chair has a pneumatic cylinder. You can replace the damaged part with a new one that fits your model and return to work in no time.
Emergency Chair Saver Kit
If your chair doesn't have a pneumatic cylinder or doesn't want to mess around with taking apart your chair, there are kits available that help you quickly and easily fix broken chairs. It includes everything needed to do the job right away— tools and instructions.
Check The Floor
If an office chair is having trouble staying on carpet or wood floors, it may be because the feet aren't properly locked. To fix this issue, push down on the front of the chair with one hand while pulling up on each foot with your other hand. The feet should pop out and lock into place when you're done.
Check The Casters
Another common cause of an unsteady office chair is loose casters. If any of these small wheels are wobbly or falling off, they need to be tightened or replaced before they can use again.
You can check each caster individually by rolling it back and forth. You may practice it on a flat surface like linoleum or tile if they seem loose, or you can try tightening them all at once by turning each one clockwise with an adjustable wrench until it's snug against its axle.
Adjust The Seat Height And Tilt
If you're having trouble getting your seat height or tilt adjusted correctly, try these two steps:
Tighten the screws on the side of the seat (not on the bottom). If they're too loose, they may be unable to hold the seat up.
Adjust the tilt mechanism on your seat so that it sits straight up when you sit down in it. When you sit in an adjustable chair, ensure it goes up straight and doesn't wobble from side to side or front to back.
Replace The Chair
The first option is to replace the chair with one that stays on its own. This might be an option if you need a new chair anyway, but if not, then it's probably better to try one of the other options.
Adjust Your Desk Height
The second option is to adjust your desk height so that it can support the weight of your body without having to lean forward at all times. This may mean buying a taller desk or putting some blocks underneath your current one until it reaches the correct height.
The best way to do this is by measuring from where you will be sitting (usually your thighs) down onto the floor and then adding about 6 inches for safety's sake.
Check The Wheels
The wheels may be stuck or frozen, making it difficult for the chair to move up or down. If this is the case, you should give each wheel a good push to see if they rotate easily.
If they do not move at all or only move slightly when pushed hard, your best bet is to take off one of the wheels and clean it with some rubbing alcohol and a rag until it looks shiny again.
Take Apart The Chair And Tighten The Screws
If your chair has a lever on the front of the base that allows you to adjust the height, the screws holding everything together may have become loose over time. This is easily remedied by removing your chair and tightening them back up again. To do this:
- Remove any casters from your chair if they're still attached (if you have casters). You'll probably need a screwdriver or other tool for this step.
- Open up the mechanism located at the bottom of your chair. You may remove screws or bolts with a screwdriver or hex wrench (depending on how many pieces there are).
- Once you've opened up this mechanism, look for any loose nuts or screws near where these pieces meet together. If you see any loose, tighten them down using pliers or another tool like an Allen wrench.
We hope you find your desired solution. If it remains still there please contact the manufacturer or experts.