There are a few possible reasons, but the most common is that your keyboard is stuck in shortcut mode. Shortcut mode is a feature of some keyboards that allows you to perform certain actions with a single keystroke.
For example, you might be able to type "B" to bold text or "U" to underline it.
This can be convenient, but it can also be a pain if you accidentally enable the feature and can't figure out how to turn it off. If you're having this problem, don't worry! This article will show you how to troubleshoot the "Keyboard Stuck In Shortcut Mode" error on your Windows computer. We'll also provide some tips on how to prevent this error from occurring in the future.
Keyboard Stuck In Shortcut Mode - Know About Sticky Keys
If you are using a keyboard that has a shortcut mode, you can select this mode and use the keyboard to perform different actions. For example, a keyboard may have keys assigned to open programs or websites.
If you have accidentally activated the shortcut mode on your keyboard, you will need to disable it to get back to using your computer normally again.
How To Resolve The Issue Of Keyboard Stuck In Shortcut Mode?
Do it by pressing the Windows key and R simultaneously, which will bring up Run in the search box on most computers today.
You must type MSConfig into Run
and press enter on your keyboard. This will bring up the System Configuration window on your screen, where you can select Disable Shortcut Keys at the bottom of the window under Startup Settings.
What Are The Factors Caused Keyboard Stuck In Shortcut Mode?
Using a Windows computer may have encountered the "Keyboard Stuck In Shortcut Mode" error. This error can be caused by various factors, including hardware issues, driver problems, or malware. If your keyboard is stuck in shortcut mode, you can reset it by pressing the following keys on your keyboard:
Windows key + Ctrl + Shift + B
This will reset the keyboard to its default settings. If this does not work, try restarting your computer.
Shortcut Keys And Their Solutions
How Do TO Get Back Keyboard Stuck In Shortcut Mode?
There are several ways to get it back. Here are a few things you can try:
Reboot
Clean
Check for any pieces of dust or lint blocking the sensor in front of the trackpad.
Fn+F6
If you're using a MacBook Pro or MacBook Air, you can try pressing the fn key + F6 key simultaneously to toggle on and off shortcut mode.
This will let you use your keyboard normally while still retaining some shortcuts like volume and screen brightness controls when they're needed again later on (you have to do this every time you restart your computer).
NVRAM Stores
On the Mac, NVRAM stores some settings that are critical to the operation of the computer. For example, it stores information about whether or not a key is being held down so that if you want to type "a" and then "b," do it without having to press shift first.
Sometimes, when a keyboard is stuck in shortcut mode, there can be an issue with the keyboard settings. Sometimes keyboard settings go corrupted. If this is the case for you, here's how to fix it:
Shut down your Mac and unplug all other peripherals such as printers and external drives.
Turn on your Mac while holding down Command+Option+P+R. Keep these keys held down until you see the screen flash white (but don't release them until after this). Once you see the screen flash white, release all keys at once.
If this doesn't work for you, try resetting NVRAM using Apple's Hardware Test by following these steps:
- Shut down your Mac and unplug all other peripherals such as printers and external drives.
- Turn on your Mac while holding down Command+Option+P+R.
Shut Down For 30 Mins
now turn on your Mac again while pressing these keys: Command (⌘), Option (⌥), P, and R (in that order). Hold each key until you hear three chimes from your computer.
How To Reset Your Mac's Pram/NVRAM?
If none of these suggestions work, try resetting your Mac's PRAM/NVRAM by following these steps: Shut down your Mac and unplug it from power for at least 30 seconds;
now hold down Command+Option+P+R+S simultaneously on power up until you see a grey screen with white text on it that says: "PRAM has been reset." This usually takes about 15 seconds and sometimes requires extra taps.
If None Of These Suggestions Work
Try resetting your Mac's PRAM/NVRAM by following these steps:
- Shut down your Mac and unplug it from power for at least 30 seconds;
- then disconnect all external devices except for an external display or monitor;
- now turn on your Mac again while pressing these keys: Option (⌥),
- Command (⌘), P, and R (in that order). Hold each key until you hear the start-up sound twice.
- Your Mac will restart, so be patient.
What Could Be The Possible Reasons For This Problem?
The most common reason for a keyboard stuck in shortcut mode is that you accidentally switched to a new keyboard layout. This can happen if you use more than one language and run into a situation where both layouts are enabled simultaneously.
This can also occur if a software keyboard is installed on your computer, such as SwiftKey, TouchPal, etc. These software keyboards may interfere with the default Android keyboard and cause it to become unusable.
Solution For Default Android Keyboard
If this happens,
- try disabling any other keyboard running in the background by going to
- Settings -> Language & input -> Advanced settings -> Virtual keyboard -> Disable all input methods.
- If this doesn't work,
Try uninstalling the software keyboard using its uninstaller app or go to
- Settings -> Apps & notifications -> App info and uninstall it.
Software Keyboards
If you're having problems with the software keyboard not responding, make sure that you:
Disable any third-party keyboards you have installed. Go to
- Settings -> Apps & notifications -> App info and tap on the application name (usually Samsung Keyboard), then tap Uninstall, followed by OK.
Adrian Peck
Frequently Asked Questions
Q. I have a laptop that is stuck in shortcut mode. The keyboard and trackpad are not working. How do I get the computer out of this mode?
Press Alt + Tab until your cursor is on the first icon, then press Tab again to select it.
Q. I have a shortcut keyboard, and it is stuck in shortcut mode. How do I get it out of shortcut mode?
Unplug the keyboard and plug it back in again. This should reset the keyboard to default mode. If this does not work, try holding down all the keys on your keyboard at once for 5 seconds. This will force the keyboard into factory mode and reset all settings to default.
Q. My shortcut keyboard stopped working after updating my computer or software; what do I do?
Make sure you have updated your software to a newer version that supports your shortcut keyboard. If you have already done this, you may need to reinstall your software and update it if necessary.
Final Words
This problem is particularly nefarious, as many users who search for this type of error don't truly understand the cause or severity of their problem.
If you do wish to try and fix the shortcut mode issue, the above instructions may be of some help.
Regarding hardware replacement, laptops are notoriously difficult to disassemble and repair; if you decide to take on this task yourself, make sure that your warranty is valid before proceeding.
Related Posts
